PCE Instruments PCE-WO2 10, User Manual

Page: 5 / 16

© PCE Instruments
3
4 Installing the Batteries
•
Twist the electrode collar counter clockwise, pull the 6-pin connector away from the
tester.
•
Insert two AAA batteries into the battery compartment, note polarity.
•
Align the slot on connector, gently push the connector into the tester.
•
Twist the electrode collar clockwise until it is tight.
5 Display
PCE-WO2 10 pocket dissolved oxygen tester is equipped with an easy-to-read LCD display that
used to show the measured values and mode icons. The
following table describes the function of each icon.
INDEX:
ICON DESCRIPTION
MEAS Indicates the tester is in the measurement mode.
CAL Indicates the tester is in the calibration mode.
SETUP Indicates the tester is in the setting mode.
HOLD Indicates the measuring value has been locked.
ATC Indicates the temperature compensation is enabled.
When the battery is depleted, the icon will disappear.