7-2 Set WBGT alarm value
When the lower display show " AL "
1)Use the " Button " ( 3-6, Fig. 1 ) or " Button " (
▲
▼
3-5, Fig. 1 ) to adjust the WBGT alarm value.
2)After the WBGT alarm value is selected, press the "
Enter Button " ( 3-4, Fig. 1 ) will save the setting
function with default.
If the WBGT measurement value over the
alarm setting value, the buzzer will sound for
warning.
7-3 Decimal point of SD card setting
The numerical data structure of SD card is default used
the " . " as the decimal, for example "20.6" "1000.53" .
But in certain countries ( Europe ...) is used the " , " as
the decimal point, for example " 20,6 " "1000,53".
Under such situation, it should change the Decimal
character at first.
When the lower display show " dEC "
1)Use the " Button " ( 3-6, Fig. 1 ) or " Button "
▲
▼
( 3-5, Fig. 1 ) to select the upper value to " bASIC " or
" Euro ".
bASIC - Use " . " as the Decimal point with default.
Euro - Use " , " as the Decimal point with default.
2)After select the upper text to " bASIC " or " Euro ",
press the " Enter Button " ( 3-4, Fig. 1 ) will save the
setting function with default.
19
