The meter Temp. display unit is defaulted to " "
℃
If intend to let the meter's temperature unit
default to " " , then please refer chapter 7-6,
℉
page 21 ).
Wet bulb globe Temp. ( WBGT ) measurement
1)Power on the meter by pressing the " Power Button "
( 3-2, Fig. 1 ).
* After power on, then press the " Power Button "
( 3-2, Fig. 1 ) > 2 seconds will power off.
2)Function select to " Wet bulb globe Temp. " measurement.
* The upper Display will show the WBGT value.
*
The lower Display will show the text " _bgt in " or
-bgt out "
@ in = Indoor/Outdoor and no sun
@ out = Outdoor and full sun
* During make the WBGT measurement, if pressing
the " in/Outdoor Button " ( 3-4, Fig. 1 ) continuously
will select the " indoor WBGT " or " outdoor WBGT "
function.
3)It can set the WBGT alarm value, if the
measurement value alarm setting value, the
≧
buzzer will sound for warning along with the
flashing Display.
*
The alarm value setting procedures, please refer
chapter 7-2 ( page 19 ).
Wet bulb Temp. ( WB ) measurement
1)Power on the meter by pressing the " Power Button "
( 3-2, Fig. 1 ).
2)Function select to " Wet bulb Temp. " measurement.
* The upper Display will show the Wet bulb Temp. value.
*
The lower Display will show the text " _b ".
9
