4. MEASURING PROCEDURE
4-1 Function selection
1)Turn on the meter by pressing the " Power Button "
( 3-2, Fig. 1 ) momentarily.
*
Pressing the " Power Button " ( 3-2, Fig. 1 )
continuously and > 2 seconds again will turn off the
meter.
2)The meter can select 6 kind function as :
1. Wet bulb globe Temp. ( WBGT )
2. Wet bulb Temp. ( WB )
3. Dew point Temp.
4. Humidity and Air Temp. ( TA )
5. Black globe Temp. ( TG )
Pressing the " Function Button " ( 3-3, Fig. 1 )
continuously ( not release the button ), the Display
will show the following text in sequence :
_bgt Wet bulb globe Temp. ( WBGT )
* in = Indoor/Outdoor and no sun
out = outdoor and full sun
_b
Wet bulb Temp. ( WB )
dP
Dew point Temp.
tg
Black globe Temp. ( TG )
rH
Humidity
tA
Air Temp. ( TA )
Until the Display show the desired mode ( Function ),
just release the " Function Button " ( 3-3, Fig. 1 ), the
meter will execute this function with default.
8
