Manual
26
4.16.1.10 Settings for fusion
Press hot k
ey 2 until “fusion” flashes yellow. Press the Enter key to switch to the settings mode. Here you
can set the parameters “Mixing proportion” and “Adjust”. If there has been no activity for two seconds the
instrument will return to the real-time-measurement mode.
-
Mixing Proportion:
Press
˂ or ˃ to change the modes.
-
Adjust:
In order to confirm, please choose the size. To adjust the box size, use
˂, ˃, ˄ and ˅. Then you
can choose the position of the box by using the same keys. If there has been no activity for two
seconds, the instrument returns to real-time-measurement mode.
4.16.1.11 Dew point temperature alarm
Use
˂ or ˃ to enable or disable the dew point temperature function. If the alarm is activated, the ambient
conditions (temperature and relative humidity) need to be set. The dew point temperature will then be
displayed in the lower left corner of the LCD. If the dew point temperature exceeds the pre-set value, the
temperature value will switch to the warning colour.
4.16.1.12 Alarm colour
There are different warning colours. You can choose between AUTO (no warning colour), black, white,
red, orange, yellow, green, blue, grey and purple. AUTO is set as standard.
Note: The dew point temperature is the temperature of the surface of an object at which there is balance
of condensing water and vaporized water. At this temperature the formation of condensate begins.
