© PCE Instruments
15
5
Maintenance
5.1
Cleaning
The meter should be stored at room temperature. The lens of the infrared sensor is the most
sensitive part of the instrument. Make sure that it is always clean. If the lens ever becomes dirty,
it should only be cleaned with a soft cotton cloth or stick. Use only water or medical alcohol for
cleaning. The lens should be completely dry before the meter is used again. Do not immerse the
instrument in water.
6
Troubleshooting
The following problems may occur during operation of the thermal imaging camera. If the
suggested solutions are not helpful, please contact PCE Instruments.
Problem
Cause
Solution
The thermal imaging camera
cannot be switched on
The battery is discharged
Fully charge the thermal
imaging camera with the
supplied USB cable (see
3.2.1)
The thermal imaging camera
switches itself off during
operation
The battery is discharged
Fully charge the thermal
imaging camera with the
supplied USB cable (see
3.2.1)
Automatic
shutdown
is
activated
Switch
on
the
thermal
imaging camera again and
change the setting of the
automatic
shutdown,
if
necessary (see 4.5.1).
