Manual
www.industrial-needs.com
2
1. Safety Precautions
Please read the following instruction manual before operating with the device. Damages caused by
disregard of the instructions written in this manual, are excluded from any warranty or liability.
-
This device is only designed for the applications mentioned in this manual. In case the
device is used for any other application than these, it might lead to hazardous situations.
-
The device is can only be used within the permitted temperature range.
-
The sensor must be stored in the carrying case included in delivery, if not used.
-
Let the device prior to application acclimate to the surrounding temperature
-
The device may be opened only by specialized personnel of PCE instruments
-
Never set down the device on its control panel (e.g. onto a table, with the console faced
down).
-
The device should be only cleaned with a damp cloth. Do only use pH-neutral solvents.
2. Technical Specifications
Measurement geometry:
45° / 0° circular lighting at 45°, measurement at 0° according to DIN
5033
Measurement range:
RGB: 0 … 1023 each for, R, G and B / HSL 0 … 1,000 for H, S, L
Resolution:
1 for RGB measurement / at 0.001 HSL-measurement
Repeatability:
< 3 RGB, at min. 10 measurements
Colour models:
RGB and HSL
Spectral range:
400 nm up to 700 nm
Light source:
2 white light diodes
Caution: The device can be only operated with non-fluorescent
sensors
Applications:
- not for illuminated surfaces (absolute values)
- for self-luminous surfaces (relatively compared)
Display:
Relative and absolute values
Interface:
RS-232 at display
Software:
Optional software kit
Power Supply:
1 x 9 V bloc battery
Dimensions (sensor):
45 x 92 x 160 mm
Weight:
approx.. 600 g
Surrounding conditions:
0 … +50 °C / max. 80 % RH
Standards:
DIN 5033
