Manual
3
3. Detailed description of device
Fig.1
4-1
Display
4-10
RS-232 interface
4-2
Power On / Off
4-11
DC 9V adapter socket
4-3
Operation 1
4-12
Battery compartment
4-4
Function
4-13
Support
4-5
Calibration
4-14
Input for stand
4-6
REL-
4-15
Sensor head
4-7
RGB / HSL
4-16
Operation 2
4-8
Light on / off
4-17
Handle
4-9
Input -sensor
4-18
Connector
4. Measuring Procedure
4.1
Measurement of samples that are not self-luminous
Materials that do not luminaire on their own, are e.g. paper, leather, synthetics …
- Insert the Connector (4-17, Fig. 1) into the relevant input (4-9, Fig.1).
-
Start colour meter by pressing “Power” (4-2, Fig. 1). The display will then indicate “0” for RGB.
- Take the handle of the pistol (4-17, Fig. 1), and place the sensor head (4-15, Fig. 1) near to
the mat
erial’s surface and press it slightly onto the surface.
Fig. 2
trigger for measurement
sensor head
material surface
