3
Congratulations on your purchase of the Manometer! This instrument is portables battery operated pressure
measuring device.
The Manometer is ideal for HVAC/R technicians measuring pressure level, Medical equipment computer
peripherals, pneumatic Controls.
INTRODUCTION
•
The meter will display all LCD segments when it is first turned on for approx. 3 seconds. Though you
might have seen DATALOGGER, Y/M/D, REL, AVG ... these are not available for the meter. The meter
with data logger features named 8205D/821 5D/8280D/821 OOD. Please contact the store or the place
you purchased.
•
The LCD is divided into two distinct sections: One large (Primary) top screen and one smaller right-
bottom bottom screens (relative Clock), The 2 display areas keep you constantly updated with the)
pressure measurements.
•
The Meter measures Gauge pressure-a measure of pressure in psi that is referenced to ambient
pressure and Differential pressure - a measure of the difference two pressures.
•
11 pressure units are selectable for Imperial and Metric in the different area: bar, mmHg, ozin², kgcm²,
psi, inH2, kPa, ftH2O|, inHg, cmH2O, mbar.
•
Please check the tubing is not leakage or damaged before using
CONVERSION
Manometer
PSI
Inch of
H2O
mbar
kg/cm³
PCE-P05
5
138
345
0,35
PCE-P15
15
415
1034
1,05
PCE-P30
30
830
2068
2,10
PCE-P50
100
2768
6895
7,03
CONROLS AND INDICATORS
1. Primary Data Screen displays pressure value.
2.
“-“
: Minus pressure display.
3.
MAX MIN
: pressure recorded.
4.
REC
: starts recording mode and displays max./min. pressure recorded,
5.
AVG
: Average records (N/A).
6.
DC
: power in Jack.
7.
RS232
: output port.
8.
H/M/S
88:88:88: displays data for Hour / Minute / Second.
9. : Pressure unit indication.
10.
BAT
: Battery low indicator.
11.
DIF
: Differential pressure mode.
12.
“+”
: Positive pressure home plug.
13.
“-“
: Negative pressure hose plug.
14.
HOLD
: Freezes pressure reading.
15.
REL
: Establish a relative zero for the primary screen information. (N/A)
