© PCE Instruments
11
8.5
Recording the measured values
To record individual measured values, the storage interval must be set to "0000" seconds. The
storage interval can only be set when the air velocity measuring function "VEL" is set. To do this,
press the "SAMPLE" key and now set the storage interval accordingly. Then press the "REC" key
whenever you want to save the current measured value. The memory location used is shown on
the lower display and the "REC" display flashes once briefly above the display.
For continuous recording, set a desired storage interval with the "SAMPLE" key. You can select
between 1 ... 9999 seconds. Then press the "REC" key once. The lower display briefly shows the
storage interval. REC" is shown above the display. This signals that the measured values are
being recorded. To interrupt saving, keep the "REC" key pressed. If you press the "REC" key
again, recording will be restarted.
Date and time are only saved when recording with the software.
8.5.1
Read out data memory
To read out the data memory on the meter, press and release the "READ" key once. "READ" is
now shown above the display. All readings displayed are now those from the memory. Each time
you press the "READ" key, the next memory value is displayed. Now press the "AREA/SAMPLE"
key and type in the memory location you want to read out. To return to normal measuring mode,
keep the "READ" key pressed until "READ" disappears from the display.
