© PCE Instruments
9
7.2
Area specification for volume flow measurement
In order to perform a volume flow measurement, it is mandatory to perform an area measurement
of the flow. To do this, press the "AREA/SAMPLE" key in volume flow mode. Now enter the area.
The unit of measurement m
2
or FT
2
flashes next to the display. Set the corresponding unit of
measurement before entering the area.
7.3
2/3 MAX volume flow measurement
During the volume flow measurement, it is possible to display 2/3 of the maximum volume flow.
To do this, press the "ENTER" key. 2/3 MAX" appears on the display. Only 2/3 of the maximum
measured value will be displayed. Press the "ENTER" key again to exit the mode.
8
Lowest, highest and average measured value
For velocity and volume flow measurement, the lowest / highest and the average measured value
can be displayed by pressing a key. To use these functions, repeatedly press the "MAX/MIN" key
until you have reached your desired function.
8.1
Highest measured value
When displaying the highest measured value, only the highest measured value is displayed after
activating this function. When "MAX" is displayed, this function is active. When the function is
changed, the value expires.
