© PCE Instruments
2
2
Specifications
Functions
PE pre-test (protective earth)
available, error
PP simulation (charging cable coding)
open, 13 A, 20 A, 32 A, 63 A
CP simulation (communication line)
A, B, C, D, error
Outputs (for test purposes only)
Measurement connections
L1, L2, L3, N, PE
max. 250 / 430 V AC, 10 A
laboratory plug
Schuko connection
max. 250 V AC, 10 A
Fuse of the Schuko connection
Fuse F 10 A / 250 V,
5 x 20 mm
CP signal output
±12 V PWM
Further specifications
Input voltage
1-phase: 250 V AC / 3-phase 430 V AC,
50 / 60 Hz, max. 10 A
Charging cable plug type 1
AC charging mode 3, compatible with
IEC62196-1 type 1 or SAE J1772 with
vehicle connector (type 1, 5-pin, 1-phase)
Charging cable plug type 2
AC charging mode 3, compatible with
IEC62196-2 type 1 or SAE J1772 with
vehicle connector (type 2, 7-pin, 3-phase)
Measurement category
CAT II 300 V
Protection class
IP54
Degree of pollution
2
Operating conditions
0 ... 40 °C / 32 ... 104 °F, 10 ... 85 % RH,
non-condensing
Storage conditions
-10 ... 50 °C / 14 ... 122 °F, 10 ... 85 % RH,
non-condensing
Maximum working height
max. 2000 m / 6561 ft
Dimensions (handheld only)
277 x 109 x 63 mm / 10.9 x 4.3 x 2.4"
Weight
approx. 1 kg / 2.2 lb
3
Delivery scope
1 x electrical vehicle tester PCE-EVSE 300, 1 x charging cable plug type 1, 1 x charging cable
plug type 2, 1 x transport bag, 1 x user manual
4
Safety symbols
Symbol
Meaning
Follow the instructions
Risk of electric shock
Double insulation
Connection must be made to the protective earth conductor "PE
”
Reference, please pay special attention
