© PCE Instruments
1
1
Safety notes
Please read this manual carefully and completely before you use the device for the first time.
The device may only be used by qualified personnel and repaired by PCE Instruments
personnel. Damage or injuries caused by non-observance of the manual are excluded from our
liability and not covered by our warranty.
•
The device must only be used as described in this instruction manual. If used
otherwise, this can cause dangerous situations for the user and damage to the meter.
•
The instrument may only be used if the environmental conditions (temperature,
relative humidity, …) are within the ranges stated in the technical specifications. Do
not expose the device to extreme temperatures, direct sunlight, extreme humidity or
moisture.
•
Do not expose the device to shocks or strong vibrations.
•
The case should only be opened by qualified PCE Instruments personnel.
•
Never use the instrument when your hands are wet.
•
You must not make any technical changes to the device.
•
The appliance should only be cleaned with a damp cloth. Use only pH-neutral
cleaner, no abrasives or solvents.
•
The device must only be used with accessories from PCE Instruments or equivalent.
•
Before each use, inspect the case for visible damage. If any damage is visible, do not
use the device.
•
Do not use the instrument in explosive atmospheres.
•
The measurement range as stated in the specifications must not be exceeded under
any circumstances.
•
Non-observance of the safety notes can cause damage to the device and injuries to
the user.
•
The tester is not a tester for the Absence of Voltage (TAV). Use a suitable instrument
for this purpose.
•
Do not immerse the unit or work in the rain.
•
Inspect the unit before use. Do not use if damaged.
•
If the “400V!” pictogram is displayed, check the installation.
•
ASS operations must be carried out by the manufacturer.
•
The addition of measurement current (<15 mA) from the tester with fault current from
computer or electronic equipment already plug can lead to the drop-out of the 30 mA
circuit breakers.
We do not assume liability for printing errors or any other mistakes in this manual.
We expressly point to our general guarantee terms which can be found in our general terms of
business.
If you have any questions please contact PCE Instruments. The contact details can be found at
the end of this manual.
