Manual
10
5.1.5
Resistance measurement
Before taking a resistance measurement, make
sure that the power is cut off from the circuit and
that all capacitors are discharged. Then switch the
main function selector to
. Connect the red
test lead to the + terminal and the black test lead to
the COM terminal. Touch the points to be tested
with the tips of the test leads and read the result
which will appear in the LCD.
5.1.6
Continuity test with buzzer
Switch the main function selector to
.
Connect the red test lead to the + terminal and
the black test lead to the COM terminal. Place the
tips of the test leads at the points where you wish
to carry out the continuity test. If the resistance is
below 40
Ω, the beeper will sound continuously.
