Manual
9
5.1.3
AC current measurement
For safety reasons, it is recommended to
disconnect the test leads from the meter
before carrying out this measurement.
Then switch the main function selector to
. Open the clamp by pushing the lever
and insert the cable to be measured into
the hole. When the cable is kept at the
centre, this will ensure most accurate
results. Close the clamp and read the
result from the LCD. It might occur that the
result is hard to read. In this case, press
the HOLD key and read the result at a
later stage.
5.1.4
DC current measurement
For safety reasons, it is recommended to
disconnect the test leads from the meter
before carrying out this measurement.
Switch the main function selector to
.
Open the clamp by pushing the lever and
insert the cable to be measured into the
hole. When the cable is kept at the centre,
this will ensure most accurate results.
Close the clamp and read the result from
the LCD. It might occur that the result is
hard to read. In this case, press the HOLD
key and read the result at a later stage.
