© PCE Instruments
17
Eng
li
s
h
4.3.2
How to select the mode
The meter has two different modes to display readings. In measuring mode, only the current
reading will be displayed whereas in mean value mode, the current reading will be displayed along
with the number of values measured and the resulting mean value. You can switch modes by
pressing and holding the
key for a short time.
Measuring mode:
1. Reading
3. Connected probe
2. Battery level
4. Unit
Mean value mode:
1. Mean value
4. Unit
2. Battery level
5. Current reading
3. Connected probe
6. Number of readings
By pressing the
key, readings can be deleted and the mean value can be reset. By pressing
the
key, a reading can be deleted. For a complete reset of all values, press the
key several
times until the number of measured values is 0.
5
How to use the coating thickness probes
Attention:
-
The Fe and M probes can only measure and calibrate on ferromagnetic materials and
the NFe probe can measure and calibrate on ferromagnetic as well as non-
ferromagnetic materials.
The M probes do not come with a material plate, which means that a calibration must always be
carried out on the uncoated, ferromagnetic material surface.
For correct calibration and
measurement, the material surface must be 10 times as large as the probe surface.
Summary of Contents for PCE-CT 90
Page 27: ...PCE Instruments...
