Manual
17
7.2.2 Operation
1. Put the colour meter into the measuring device PCE-CSM UTC (as seen on the picture below)
and tighten it by using the adjustment plate (6) and the safety screws (7). The measuring hole
should align with the measuring hole of the measuring chamber (3). Make sure that the colour
meter is in the right place and tightened properly before moving on.
2. Fill the tank (4) with the medium to be measured and put it into the measuring chamber (3). Make
sure the filling level lies between the MIN and the MAX indication of the tank.
The tank has two sides with a dull surface. Only touch it on those two sides to prevent
measurement errors due to dirt.
