Manual
7
5
Operation
5.1
Turn on the device
1. Make sure the battery is installed or the device is connected to an external power source.
2. Turn on the device by pressing the power button. After a few seconds, you are automatically
directed to the “Standard Measurement” screen. The default setting for this measuring mode is
L*a*b*C*h.
5.2
Take a measurement
If you turn on the device, you are directed to the “Standard Measurement” screen. To take a
measurement, follow these steps:
1. Press and hold the testing button (see chapter 4.1). Next, a light cone appears to help you aim at
the measuring point.
2. Move the device as close to the measuring point as possible.
3. Release the testing button. The colorimeter now takes a measurement.
After the measuring procedure is finished, you can the results on the following screen:
