Manual
15
7.2.2
Operation
1. Put the colorimeter in the measuring device PCE-CSM UTC (as seen on the picture below) and
tighten it by using the adjuster plate (6) and the safety screws (7). The Measuring hole should
align with the measuring hole of the measuring chamber (3). Make sure that the colorimeter is in
the right place and tightened properly before moving on.
2. Fill the tank (4) with the desired medium and put it into the measuring chamber (3). Make sure
the filling level lies between the MIN and the MAX indication of the tank.
The tank has two sides with a dull surface. Only touch it on those two sides to prevent
measurement errors due to dirt.