Manual
16
5.1.8 Finding power supply circuits on the same floor
ATTENTION:
Turn off the power in the entire building before measuring.
-
The end of the grounding cable of the transmitter must be grounded properly and should be
located at a certain distance from the tracked pipeline. If the distance is too small, the signals and
the current circuit cannot be accurately located.
-
The stronger the signals are displayed on the Display of the locator during the tracking of the
pipeline, the closer the tracked pipeline is to the locator.
-
Set the transmission power in order to adapt it to different search radii.
-
The target position can be located accurately by using the manual mode and adjusting the
sensitivity.
