Datalogger:
CALIBRATION DATA:
They are the calibration data stored in memory of anemometer. They are used when returned for repair.
DATALOGGER SETUP:
They are the sampling time and total record numbers stored in anemometer.
Time:
This time will be used as initial time when converting data. This is a value entered by users.
Down Load:
When this button is pressed, program will ask the users to enter file name. After file name is entered, users
have 10 seconds to press the key of D. LOAD (number 5) of anemometer.
When the D. LOAD key of anemometer is pressed, all the data stored in the memory of anemometer will be
sent to PC. Program will convert all the coded data to a ASCII file under the name entered by users.
5. Specifications( 23 ± 5
°
C)
Range of Wind Velocity:
Units
Range
Resolutio
n
Threshold
Accuracy
m/s
0.0 - 45.0
0.01
0.3
±3% ± 0.1
ft/min
0 - 8800
2
60
±3% ± 20
knots
0.0 - 88.0
0.02
0.6
±3% ± 0.2
Km/hr
0.0 - 140.0
0.04
1.0
±3% ± 0.4
mph
0.0 - 100.0
0.02
0.7
±3% ± 0.2
m/s: meter per second
ft/min: feet per minute
knots: nautical miles per hour
Km/hr: kilometers per hour
mph: miles per hour
Unit Conversion table:
