4. WindowsTM Application Program
4.1. Installation of the WindowsTM Application Program
4.1.1. For Windows 3.1
A. Start MicrosoftTM WindowsTM
B. Insert disk in drive A (or B)
C. From Program Manager, select File menu and choose Run
D. Type a:\setup (or b:\setup) and press Enter key
4.1.2. For Windows 95
A. Start WindowsTM 95
B. Insert disk in drive A (or B)
C. Press START button, then select Run
D. Type in a:\setup (or b:\setup) and press Enter key
4.2. Description of WindowsTM Application Program
Main Window:
When the program is executed, the program automatically searches for connected anemometer or
available serial port. If no serial port is available, then a message of "No communication port" will be
displayed, and the program exits. Once communication port is setup, a main window will be displayed on
the screen as below:
Sample: The value under SAMPLE is the sampling time.
Temperature: Temperature of air or wind.
Option:
Display option of anemometer. MAX, MIN,
AVE, 2/3V max.
Unit:
Display units of velocity or flow (m/s, ft/min,
knot, mph, kmh, CFM, or CMM)
Value:
The value under VALUE is the reading from the
anemometer.
Range:
The text displayed under RANGE is the range
of the unit selected at the anemometer.
Minimum:
The minimum value ever recorded by PC.
Reset:
Clear minimum and maximum value recorded.
Maximum:
The maximum value ever recorded by PC.
Lower:
The minimum value of the range specified.
Upper:
The maximum value of the range specified.
File
: If you select File, a pull down menu will show six options:
Name, Start Recording, End Recording, VIEW, Plot Data from
File, and Exit.
Name: Enter file name to store data displayed in LCD at specified interval.
Start Recording: Start recording when selected
