PCE Instruments BSH series, User Manual

Page: 10 / 16

© PCE Instruments
8
Eng
li
s
h
5.3.3 Advanced settings
Press the [ON/OFF] key to turn off the scales and press the [ON/OFF] key again to turn them
back on. The scales now perform the self-
test procedure. Once the display shows “-----“, press
the [PCS] key.
Now you get to the advanced settings. Here, you can make the following adjustments:
Setting Display
indication Options
Zero track range
„Zrd 0.8 d“
0.0 / 0.2 / 0.4 / 0.6 / 0.8 / 1.0 / 1.5 / 2.0 d
Zero track time
„Zrt 1.0 sec“
0.5 / 1.0 / 1.5 / 2.0 / 2.5 / 3.0 / 3.5 / 4.0 s
Zero value
„rZd 3 d“
1 / 3 / 5 / 8 d
Filter settings
„FIL 3“
1 / 2 / 3
Zero range at boot-up
„PZr 10 %FS“
1 / 2 / 3 / 4 / 5 / 8 / 10 / 20 % FS
Zero range
„YZr 10 %FS“
3 / 4 / 5 / 10 % FS
Taring range
„Ytr 100 %FS“
100 / 50 % FS
Overload indication
„Our 0 %FS“
2 / 5 / 10 / 0 %FS
Key sounds
„bZ ON“
ON / OFF
Activate taring function
„Zt ON“
ON / OFF
Auto power-off
„A OFF“
OFF / 3 / 5 / 10 min
Backlight
„L Au“
OFF / ON / Au
Press the
UNIT key to change the selected setting. Press the [ZERO] key to go to the next
setting.
Explanation
- Zero tracking: If there are very small load changes in a certain period of time,
the zero tracking function makes sure that these changes do not
affect the zero point.
- Zero range at boot-up: When starting the device, all loads within this range will be set to
zero.
- Zero range: When pressing the [ZERO] key, all loads within this range will be
set to zero.
- Taring range: Load range in which the tare function can be used.