Manual
14
9.5 Set beeper sound on/off
When the lower display show " bEEP "
1) Use the " Button " (3-5) or "
▼ Button " (3-6) to select the upper value to " yES " or " no ".
yES - Meter's beep sound will be ON with default.
no - Meter's beep sound will be OFF with default.
2) After select the upper text to " yES " or " no ", press the " Enter Button " (3-4) will save the setting
function with default.
9.6 Decimal point of SD card setting
The numerical data structure of SD card is default used the " . " as the decimal, for example "20.6"
"1000.53" . But in certain countries ( Europe ...) is used the " , " as the decimal point, for example " 20,6 "
"1000,53". Under such situation, it should change the Decimal character at first.
When the lower display show " dEC "
1) Use the "
▲ Button " (3-5) or " ▼ Button " (3-6) to select the upper text to " bASIC " or " Euro ".
bASIC - Use " . " as the Decimal point with default.
Euro - Use " , " as the Decimal point with default.
2) After select the upper text to " bASIC " or " Euro ", press the " Enter Button " (3-4) will save the setting
function with default.
9.7 Select the temperature unit °C or °F
When the lower display shows " t-CF "
1) Use the "
▲ Button " (3-5) or " ▼ Button " (3-6) to select the upper Display text to " C " or " F ".
C - Temperature unit is
℃
F - Temperature unit is
℉
2) After Display unit is selected to " C " or " F ", press the " Enter Button " (3-4) will save the setting
function with default.
9.8 Set the pH manual temperature compensation value
When the lower display show " t-SEt "
1) This function only for the pH measurement of adjusting the pH electrode's manual Temp.
compensation value. The default value is 25
℃
( 77
℉
).
2) Use the " ▲ Button " (3-5) or " ▼ Button " (3-6) to select the upper value to the desired Temp.
compensation value (
℃
or
℉
), then press the " Enter Button " (3-4) will save the setting value with
default.
9.9 ESC
When the display shows " ESC "
When the Display show the text " ESC ", then press the " Enter Button " (3-4) will finish the Advanced
Setting procedures and return to the normal measuring screen.
Note:
During execute the " Advanced Setting " function, if press " ESC Button " ( 3-3, Fig. 1 ) will exit the
" Advanced Setting " function, the LCD will return to normal screen.
