Manual
13
9.1 SD memory card format
When the lower display shows " Sd F "
1)Use the " ▲ Button " (3-5) or " ▼ Button " (3-6) to select the upper value to " yES " or " no ".
yES - Intend to format the SD memory card
no - Not execute the SD memory card format
2) If select the upper to " yES ", press the " Enter Button " (3-4) once again, the Display will show text
" yES Enter " to confirm again, if make sure to do the SD memory card format, then press " Enter
Button " once will format the SD memory clear all the existing data that already saving into the SD card.
9.2 Set clock time (Year/Month/Date, Hour/Minute/Second)
When the upper display show " dAtE "
1) Use the "
▲ Button " (3-5) or " ▼ Button " (3-6) to adjust the value ( Setting start from Year value ).
After the desired value is set, press the " Enter Button " (3-4) once will going to next value adjustment
(for example, first setting value is Year then next to adjust Month, Date, Hour, Minute, Second value ).
Note:
The adjusted value will flash.
2) After set all the time value ( Year, Month, Date, Hour, Minute, Second ), press the " SET Button " (3-8)
once will save the time value, then the screen will jump to Sampling time " setting screen ( see below ).
Note:
After the time value is setting, the internal clock will run precisely even Power off if the battery is
under normal condition ( No low battery power ).
9.3 Set sampling time (Hour/Minute/Second)
When the upper display shows " SP-t "
1) Use the "
▲ Button " (3-5) or " ▼ Button " (3-6) to adjust the value ( Setting start from Hour value ).
After the desired value is set, press the " Enter Button " (3-4) once will going to next value adjustment
(for example, first setting value is Hour then next to adjust Minute, Second value ).
Note:
The adjusted value will flash.
2) After set all the sampling time value ( Hour, Minute, Second ), press the " SET Button " (3-8) once
will save the sampling value with default then the screen will jump to " Auto power OFF " setting screen
(see below).
9.4 Auto power off management
When the lower display shows " PoFF "
1)Use the " ▲ Button " (3-5) or " ▼ Button " (3-6) to select the upper value to " yES " or " no ".
yES - Auto Power Off management will be enabled.
no - Auto Power Off management will be disabled.
2) After select the upper text to " yES " or " no ", press the " Enter Button " (3-4) will save the setting
function with default.
