Manual
10
Note:
If you press the " Logger Button " (3-8) once again will execute the Datalogger again, the bottom
text " DATALOOGER " will flash.
c. Finish the Datalogger
During pause the Datalogger, press the " REC Button " (3-4) continuously at least two seconds, the
"REC " indication will be disappeared and finish the Datalogger.
7.3 Manual datalogger (set sampling time = 0 second)
a. Set sampling time 0 second
Press the " REC Button (3-4) once , the LCD will show the text " REC ", then press the " Logger
Button" (3-8) once, the bottom text " DATALOGGER " will flashing once and Beeper will sound once, at
the same time the measuring data along the time information will be saved into the memory circuit. The
lower Display will show the Position ( Location ) no. and saved into the SD card too.
Note:
During execution of the Manual Datalogger, press the " ▲ Button " (3-5) the lower no. ( position
no. ) will flash. It can use the " ▲ Button " (3-5) or " ▼ Button " ( 3-6) to set the measuring position
( 1 to 99, for example room 1 to room 99 ) to identify the measurement location , the lower Display
will show P x ( x = 1 to 99 ).
b. Finish the Datalogger
Press the " REC Button " (3-4) continuously at least two seconds, the " REC " indication will
disappear and finish the Datalogger.
7.4 How to check the time information
During the normal measurement screen ( not execute the Datalogger ),
1) If press " Time Button " (3-7) once , the lower LCD display will present the time information of
Hour/Minute/Second ( h.m.s ) in the lower Display.
2) If press " Time Button " (3-7) once again , the lower LCD display will present the time information of
Year/Month/Date ( yy.mm.dd ) in the lower Display.
3) If press " Time Button " (3-7) once again, the LCD will return to normal screen.
7.5 How to check the sampling time information
During the normal measurement screen ( not execute the Datalogger ), If press " Sampling Button " (3-8)
once , the lower LCD display will present the Sampling time information in second unit.
