1
Thank you for selecting the PCE-PH 28L pocket pH meter. This manual provides a step-by-step guide to help you operate the meter, please
carefully read the following instructions before use.
Installing the Batteries
•
Twist the electrode collar counter clockwise, pull the electrode away from the meter.
•
Insert two AAA batteries into the battery compartment, note polarity.
•
Align the slot on electrode, gently push the electrode into the meter.
•
Twist the electrode collar clockwise until it is tight.
Display
PCE-PH 28L pocket pH meter is equipped with an easy-to-read LCD display that used to show the measured values and mode icons. The
following table describes the function of each icon.
INDEX:
ICON
DESCRIPTION
MEAS
Indicates the meter is in the measurement mode.
CAL
Indicates the meter is in the calibration mode.
SETUP
Indicates the meter is in the setting mode.
HOLD
Indicates the measuring value has been locked.
ATC
Indicates the temperature compensation is enabled.
When the battery is depleted, the icon will disappear.
