PCE Health and Fitness DSA 50, Manual

Page: 5 / 54

info@tursdaletechnicalservices.co.uk
5
DSA Monitor computer software for data display, readout and analysis (PC
under MS Windows 98SE/ME/2000/XP required).
Additional accessories:
Built-in microphone heating system.
Watertight carrying case.
KA-50 sound calibrator.
CV-06 external supply source together with 8614 power supply (Mascot).
Weatherproof accessories set for microphone.
Microphone extension cable PD5Lx (x stands for cable length, max. 6 m).
Microphone extension cable PD7Lx (x stands for cable length, max. 6 m).
Supporting stand for microphone: SM2 (2 m height) and SM4 (4 m height).
Supporting stand for the instrument: SMR (1.5 m height).
1.2. Weatherproof accessories set for microphone
This set enables to convert WK-21 microphone into WK-21WP weatherproof microphone.
It consists of:
weatherproof version of microphone protecting grid, model SM,
rain cover, model OK,
windscreen with anti-bird spikes, model TOP,
microphone holder.
To assemble weatherproof microphone proceed as follows:
Fasten the part (2) of microphone holder to microphone extension cable PD7Lx
and next connect this cable to microphone-preamplifier assembly (1) (see Fig. 1.2).
Put part (3) of microphone holder on microphone-preamplifier assembly (1)
and then screw it to part (2) of microphone holder fastened earlier to extension cable (see
Fig. 1.2).
Remove standard protecting grid (4) from WK-21 (see Fig. 1.3).
WARNING! During this and next action particular care should be observed as the
microphone diaphragm is exposed after protection grid removing and may be easily
damaged!
Screw SM weatherproof protecting grid (5) to the microphone (see Fig. 1.4).
Put OK rain cover (6) on the microphone (see Fig. 1.4).
Put TOP windscreen with anti-bird spikes (7) on the microphone assembled
as above (see Fig. 1.5) until the windscreen reaches microphone holder.
Fig. 1.6 shows completely assembled weatherproof microphone WK-21WP.
1
3