9
Changing Belt Direction
ALL WIRING CHANGES SHOULD BE PERFORMED BY A LICENSED PROFESSIONAL. DEBURR-IT! IS NOT
RESPONSIBLE FOR ANY PROPERTY OR HUMAN BODY DAMAGES.
!!IMPORTANT!! – NEVER OPERATE THE UNIT IN WHICH THE PART COULD BE PROJECTED INTO YOUR FACE OR
ANYONE OTHER PERSON.
Wait until the unit has been turned off and has come to a complete stop. Reverse unit as appropiate for the
style of control. Restart until and pay attention to any belt adjustments that need to be made.
Single Phase – Follow directions on motor nameplate for which wires to change.
Three Phase DOL only – Swap any two phases.
Three Phase reversing control – Select the opposite direction of current rotation
VFD – Selector switch operator should be installed to reverse direction on the VFD direction input.
If equipped with foot switch control, no wiring changes will be needed at the foot switch.
Note: If your abrasive belts have a directional arrow, you may need to remove the belt and reinstall so the
direction indicated matches the direction traveled.
Summary of Contents for DeBurr-It! 248-3
Page 5: ...5 ...
