PCE Americas PCE-428 User Manual Download Page 18

Page: 18 / 111

2.4 Data and Power Supply Connector

There are 7 interfaces at the bottom of the sound level meter. Open the rubber cover to see

these interfaces.

PWR:

Power connector, using the standard DC socket (2.1mm core diameter), can connect to

the 7~14V 500mA external power supply.

☆

Note:

Exceed 14V could damage the sound level meter!

MiniUSB:

MiniUSB port which connects to a computer can be select as

USB Disk

Mode

Modem Mode

, refer to

4.4.10 USB Mode

to earn more detail. Additional, MiniUSB can

be used as another external power, but the power supply must meet the requirement of

5V/1A.

USB Disk Mode

：

The files inside the MicroSD card can be access directly at this mode,

no need to install driver.

Computer can recognize the MiniUSB as serial port (virtual serial port, need to install

driver) and communicate with sound level meter by RS-232 protocol, refer to

5. RS-232

Communication Protocol

to earn more detail.

☆

Note

：

At least 1A power current capacity must be meet for power supply and cable

(cable with ferrite core is not recommend for power supply). Please select the working

mode in time after connected to the computer. Otherwise, the computer can’t recognize

the USB. The MiniUSB and RS-232 port cannot working at the same time when select

Modem Mode

MicroSD:

MicroSD socket, standard MicroSD card can be used to store SWN, OCT and CSD files.

Recommend to use card-reader to format the MicroSD card, rather than format it at the

PCE-428 / 430 / 432

Summary of Contents for PCE-428
















































































































Search results

Summary of Contents for PCE-428

Reviews:

Related manuals for PCE-428

Brands by name

Popular brands

PCE Americas PCE-428, User Manual

Search results

Summary of Contents for PCE-428

Reviews:

Related manuals for PCE-428

Brands by name

Popular brands