802.11 A/N/AC Mixed protocol. We set the Channel Width to reach HT20/40/80 Mixed. The highest 5GWIFI rate can
reach 867Mbps.
2. WPS
You can click the drop-down box and select 2.4G WPS or 5g WPS as the current default, and click the change button
to confirm, Then You can use WPS function.
J601 supports two kinds of WPS authentication, PBC and PIN. Default is PBC authentication. (The following will be
2.4GWi-Fi as an example)
WPS PBC authentication:
If device Wi-Fi Enabled, device supports WPS (Wi-Fi Protected Setup) and you have forgotten or do not wish to enter
your password to connect to your J601, you may use the following available procedures for quick access to Wi-Fi.
Open the WPS:
WPS can be opened by two methods. The first method is, enter the management interface page, press the “Apply
“button, and open the WPS. It will
be continue
120 seconds. Like the following picture.
