18
5. BASIC PHONE FUNCTIONS
Answering A Call
• The ringtone is the default one. You can change the ringtone to one of the 10
ringtones (Refer to Phone Setting Functions).
• You can pre-set special ringtones and /or caller graphic icons for particular
calling parties, and thus group your callers into different categories.
• The caller number and caller graphic icons shall be displayed on the LCD. If
the caller name and specific caller graphic icon have been programmed into a
Phone book, the name and the associated icon shall also be displayed.
• To answer, press or press . In the Call Mode, the red LED on the base unit
will blink.
Important:
When you see the Out Of Range icon on the LCD, you have moved
too far away from the base unit. Voice quality will be affected. Move closer to the
base unit.
Making A Call (Off-Hook Dialing)
• Press or press and then dial the number.
• To transfer a call from handset to speakerphone, press . To transfer a call
from speakerphone to handset, press again.
• To transfer a call from handset speakerphone to base unit speakerphone,
press the
button on the handset. Press again to transfer the call back to the
handset speakerphone.
Making A Call (On-Hook Dialing)
• You may preview the dialed number on the LCD before dialing.
• Dial the number on the LCD. Use the <Clear> key to edit.
• Press or press .
Predictive Dialing
• During on-hook dialing, this feature predicts the number you are dialing by
searching the Dialed Numbers Record.
• After you’ve dialed the first 3 digits, a predicted number will be displayed. If this
is the number you want to dial, press or press . If not, continue dialing.
• You can clear the predictive portion by pressing “Clear” and enter other digits.