Mainboard User’s Manual
14
Install the mainboard in a case. Follow the instructions provided by
the case manufacturer using the hardware and internal mounting
points on the chassis.
Connect the power connector from the power supply to the
ATX_PW1
connector on the mainboard.
If there is a cooling fan installed in the system chassis, connect the
cable from the cooling fan to the
FAN2
fan power connector on the
mainboard.
Connect the cable from the PC speaker to the
SPK1
header on the
mainboard.
Connect the case switches and indicator LEDs to the
FP1
header.
If there are a headphone jack or/and a microphone jack on the front
panel, connect the cables to the
AUDIO1
header on the mainboard.
See the illustrations below for the guide to the FP1 and AUDIO1
headers pin assignments.
AUDIO1
SPK1
1
FP1
Power/ACPI LED P2-4
HDD LED P1-3
Reset Switch P5-7
Power Button P6-8
1 2
AUDIO1
MIC 1
MIC-P 3
FPOUT-R 5
NC 7
FPOUT-L 9
2 GND
4 VCC
6 RET-R
8 Key
10 RET-L
1
FAN2
ATX_PW1
1
FP1
Summary of Contents for M930 Series
Page 4: ...Mainboard User s Manual IV...
Page 36: ...Mainboard User s Manual 32...
