2: Mainboard Installation
15
VCC
DATA2-
DATA2+
GND
1
Optional Extension Brackets
For this mainboard, you can also obtain a USB module extension
bracket for more USB ports. Install them by following the steps
below.
Note:
All the ribbon cables used on the extension brackets have a
red stripe on the Pin-1 side of the cable.
Extended USB Module
This module bracket has two USB ports for more USB devices
(USB port 3-4).
1.
Locate the USB1 header on the mainboard.
2.
Plug the bracket cable onto the USB1 header.
3.
In the system chassis, remove a slot cover from one of the
expansion slots and install the extension bracket in the
opening. Use the screw that held the slot cover in place to
secure the extension bracket to the chassis.
USB1
1
VCC
DATA1-
DATA1+
GND
Summary of Contents for M930 Series
Page 4: ...Mainboard User s Manual IV...
Page 36: ...Mainboard User s Manual 32...
