3: BIOS Setup Utility
ACPI Aware
O/S
This item supports ACPI (Advanced
Configuration and Power management
Interface). Use this item to enable or disable
the ACPI feature.
Power
Management
Use this item to enable or disable a power
management scheme. If you enable power
management, you can use the items below
to set the power management operation.
Both APM and ACPI are supported.
Video Power
Down Mode
Use this item to determine which power-
saving mode is required to power down the
graphics sub-system. You can force the
graphics to power down in Stand By or
Suspend modes, or you can disable the
powerdown.
Hard Disk
Power Down
Mode
Use this item to determine which power-
saving mode is required to power down the
hard disk drive(s). You can force the hard
disk to power down in Stand By or Suspend
modes, or you can disable the powerdown.
Standby Time
Out (Minute)
This sets the timeout for Standby mode in
minutes. If the time selected passes without
any system activity, the computer will enter
power-saving Standby mode.
Suspend Time
Out (Minute)
This sets the timeout for Suspend mode in
minutes. If the time selected passes without
any system activity, the computer will enter
power-saving Suspend mode.
PowerOn by
LAN/Ring
The system can be turned off with a
software command. If you enable this item,
the system can automatically resume if there
is an incoming call on the Modem. You
must use an ATX power supply in order to
use this feature.
PowerOn by
OnChip LAN
The system can be turned off with a
software command. If you enable this item,
the system can automatically resume on
OnChip LAN. You must use an ATX power
supply in order to use this feature.
31
Summary of Contents for M927 Series
Page 4: ...Mainboard User s Manual IV...
Page 30: ...Mainboard User s Manual 26...
Page 44: ...Mainboard User s Manual 40...
