background image

 

 

IV

Notice:  

1. Owing to Microsoft’s certifying schedule is various to every  
    supplier, we might have some drivers not certified yet by 
    Microsoft. Therefore, it might happen under Windows XP that a  
    dialogue box (shown as below) pops out warning you this  
    software has not passed Windows Logo testing to verify its  
    compatibility with Windows XP. Please rest assured that our RD  
    department has already tested and verified these drivers. Just  
    click the “Continue Anyway” button and go ahead the  
    installation.  
 

  

 
 
  
 
 

 
 
 
 
 
 

 
2. USB 2.0 Driver Limitations:  
   2-1 The USB 2.0 driver only supports Windows XP and   
         Windows 2000.    
   2-2 If you connect a USB 2.0 hub to the root hub, plugging USB 

devices into this hub, the system might not successfully 
execute certain USB devices’ connection because it could 
not recognize these devices.  

 
Currently, we are working on such limitations’ solution. As soon 
as the solution is done, the updated USB drive will be released to 
our website: www.pcchips.com for your downloading. 

 

 

Summary of Contents for M925G 9.1B










































Reviews: