III
Static Electricity Precautions
Static electricity could damage components on this motherboard.
Take the following precautions while unpacking this motherboard
and installing it in a system.
1.
Don’t take this motherboard and components out of their
original static-proof package until you are ready to install
them.
2.
While installing, please wear a grounded wrist strap if
possible. If you don’t have a wrist strap, discharge static
electricity by touching the bare metal of the system chassis.
3.
Carefully hold this motherboard by its edges. Do not touch
those components unless it is absolutely necessary. Put this
motherboard on the top of static-protection package with
component side facing up while installing.
Pre-Installation Inspection
1.
Inspect this motherboard whether there are any damages to
components and connectors on the board.
2.
If you suspect this motherboard has been damaged, do not
connect power to the system. Contact your motherboard
vendor about those damages.
