to User Define, you can insert your own timeouts for the power-
saving modes.
HDD Power Down (Disable)
The IDE hard drive will spin down if it is not accessed within a
specified length of time. Options are from 1 Min to 15 Min and
Disable.
Suspend Mode (Disable)
The CPU clock will be stopped and the video signal will be
suspended if no Power Management events occur for a specified
length of time. Full power function will return when a Power
Management event is detected. Options are from 1 Min to 1 Hour
and Disable.
Video Off Option (Suspend --> Off)
This option defines if the video is powered down when the system
is put into suspend mode.
Video Off Method (DPMS Support)
This item defines how the video is powered down to save power.
This item is set to DPMS (Display Power Management Software)
by default.
MODEM Use IRQ (3)
If you want an incoming call on a modem to automatically resume
the system from a power-saving mode, use this item to specify the
interrupt request line (IRQ) that is used by the modem. You might
have to connect the fax/modem to the mainboard Wake On Modem
connector for this feature to work.
Soft-Off by PWRBTN (Instant-Off)
Under ACPI (Advanced Configuration and Power management
Interface) you can create a software power down. In a software
power down, the system can be resumed by Wake Up Alarms. This
item lets you install a software power down that is controlled by
the power button on your system. If the item is set to Instant-Off,
then the power button causes a software power down. If the
35
