Boot Up Floppy Seek (Enabled)
If this item is enabled, it checks the size of the floppy disk drives at
start-up time. You don't need to enable this item unless you have a
legacy diskette drive with 360K capacity.
Boot Up NumLock Status (On)
This item defines if the keyboard Num Lock key is active when
your system is started.
Gate A20 Option (Fast)
This item defines how the system handles legacy software that was
written for an earlier generation of processors. Leave this item at
the default value.
ATA 66/100 IDE Cable Msg (Enabled)
Enables or disables the ATA 66/100 IDE Cable Msg. This message
will appear during reboot when you use 40-pin cable on your
66/100 hard disks.
Typematic Rate Setting (Disabled)
If this item is enabled, you can use the following two items to set
the typematic rate and the typematic delay settings for your
keyboard.
•
Typematic Rate (Chars/Sec):
Use this item to
define how many characters per second are
generated by a held-down key.
•
Typematic Delay (Msec):
Use this item to define
how many milliseconds must elapse before a held-
down key begins generating repeat characters.
Security Option (Setup)
If you have installed password protection, this item defines if the
password is required at system start up, or if it is only required
when a user tries to enter the Setup Utility.
26
