2: Mainboard Installation
Jumper JP9: Enable Flash BIOS
Use this 3-pin jumper to allow the BIOS CMOS memory to be
flashed, i.e. a new BIOS version to written to the CMOS chip
onboard.
Function
Jumper Setting
Enable Flash BIOS
Short Pins 1-2
Normal operation
Short Pins 2-3
Install the Mainboard
Install the mainboard in a system chassis (case). The board is a
micro-ATX size mainboard with a twin-tier of I/O ports. You can
install this mainboard in any ATX case. Special micro-ATX cases
are also available with a reduced number of expansion slot bays
and a smaller power supply unit. Ensure that your case has an I/O
cover plate that matches the ports on this mainboard.
Install the mainboard in a case. Follow the instructions provided by
the case manufacturer using the hardware and internal mounting
points on the chassis.
13
CASFAN1
ATX1
PANEL1
J5
