PCB Piezotronics Larson Davis SoundAdvisor NMS044 Reference Manual Download Page 57

Page: 57 / 59

NMS044 Reference Manual

Physical Characteristics

B-1

Appendix B

Technical Specifications

B.1 Physical Characteristics

DEPLOYMENT SPACE REQUIREMENTS

The NMS044 system, when deployed, requires a 3 m (10-foot) diameter on the

ground, with a 2 m (6.5-foot) overhead clearance minimum. Since sound

reflections are possible when other large objects are nearby, we recommend

additional clearance.

RECOMMENDED SOLAR PANELS

If you use solar panels other than those provided from Larson Davis, the NMS

system can support solar panels providing up to 140 Watts.

Table B.1 Weight by Package and by Component

Full Package

NMS044 with 60W solar panel (SLP001), Li

Battery, and cases

23 kg (50 lbs)

Components

NMS044 only

8.18 kg (18 lbs)

60 Watt solar panel only (SLP001)

9 kg (19.85 lbs)

100 Watt solar panel only (SLP002 )

12.27 kg (27.05 lbs)

Telescoping pole, mic shroud, and

mic/preamp combo in bag

1.92 kg (4.2 lbs)

LiFePo Battery (BAT019)

5.8 kg (12.8 lbs)

SLA Battery (BAT021)

11.2 kg (24.7 lbs)

Table B.2 Dimensions by Component

NMS044 Case

61 cm x 35.5 cm x 18 cm

(24” x 14” x 7”)

60 W Solar Panel (SLP001)

66 cm x 35.5 cm x 8 cm

(26” x 14” x 3”)

100 W Solar Panel (SLP002)

50 cm x 68.5 cm x 8 cm

(20” x 27” x3”)

Canvas Bag

48 cm x 23 cm x 15 cm

(19” x 9” x 6”)

Summary of Contents for Larson Davis SoundAdvisor NMS044




























































Search results

Summary of Contents for Larson Davis SoundAdvisor NMS044

Reviews:

Brands by name

Popular brands

PCB Piezotronics Larson Davis SoundAdvisor NMS044, Reference Manual

Search results

Summary of Contents for Larson Davis SoundAdvisor NMS044

Reviews:

Brands by name

Popular brands