Model Number
8159-1112A
STRAIN GAGE SENSOR SIGNAL CONDITIONER
Revision: A
ECN #: 37693
[7]
Performance
ENGLISH
SI
Linearity
± 0.015 % FS
± 0.015 % FS
Environmental
Temperature Range
+14 to +122 °F
-10 to +50 °C
Temperature Stability
± 0.56 µV/°F
± 1 µV/°C
Maximum Humidity
90 %
90 %
[5]
Electrical
Excitation Voltage(± 0.5 %)
10 VDC
10 VDC
[1]
Full Scale Input
2.5 mV/V
2.5 mV/V
[2]
Output Voltage(Analog Signal)
± 10 VDC
± 10 VDC
Output Current(Analog Signal)
4 to 20 mA
4 to 20 mA
Output Bandwidth
0 to 1000 Hz
0 to 1000 Hz
[3]
Digital Resolution
1 part in 19,999
1 part in 19,999
Common Mode Rejection
>120 @50-60 Hz
>120 @50-60 Hz
Display Type
0.4in. (10.2mm) LED
0.4in. (10.2mm) LED
Display Range
± 99,999 (5 digits)
± 99,999 (5 digits)
Decimal Point
Adjustable via front panel
Adjustable via front panel
Set Points, Open Collector
2 High and 2 Low
2 High and 2 Low
Shunt Calibration
Actuated via front panel
Actuated via front panel
Shunt Calibration Resistor
Accessible through rear panel
Accessible through rear panel
Power Required
115/50 to 60 VAC/Hz
115/50 to 60 VAC/Hz
[4]
Input
Fully Differential (bi-polar)
Fully Differential (bi-polar)
Physical
Electrical Connector(Sensor)
9-Pin Female D-sub
9-Pin Female D-sub
Electrical Connector
(input/output)
15-Pin Male D-sub
15-Pin Male D-sub
Electrical Connector
(AC Power Input)
IEC 320
IEC 320
Size (Height x Width x Diameter)
1.89 in x 3.78 in x 5.88 in
48 mm x 96 mm x 149 mm
[6]
Weight
1.3 lb
0.59 kg
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
F
- 230 VAC operation
NOTES:
[1] Default Value: Internally selectable between 5 VDC and 10 VDC @120 mA max with remote
sense short circuit current limiting.
[2] Default Value: Internally selectable between 1.5 mV/V, 2.5 mV/V, and 3.5 mV/V.
[3] Upper frequency limited by single pole, low-pass filter.
[4] Unit set to 230 VAC when ordered as "F8159-0012A", internally selectable
[5] At +104 °F (+40 °C)
[6] 1/8 DIN size.
[7] See PCB Declaration of Conformance PS113 for details.
SUPPLIED ACCESSORIES:
Model 017 AC Line Cord
Entered: DMW
Engineer: SAC
Sales: JJM
Approved: GLB
Spec Number:
Date: 11/21/2011
Date: 11/21/2011
Date: 11/21/2011
Date: 11/21/2011
36713
PCB Load & Torque, Inc.
24350 Indoplex Circle
Farmington Hills, MI 48335
UNITED STATES
Phone: 866-684-7107
Fax: 716-684-0987
E-Mail: [email protected]
Web site: http://www.pcbloadtorque.com
