Model Number
3711E1110G
DC RESPONSE ACCELEROMETER
Revision: B
ECN #: 46334
[7]
Performance
ENGLISH
SI
Sensitivity(± 5 %)
200 mV/g
20.4 mV/(m/s²)
Measurement Range
± 10 g
± 98.1 m/s² pk
Frequency Range(± 3 dB)
0 to 1000 Hz
0 to 1000 Hz
[2]
Frequency Range
(± 3 dB)
0 to 500 Hz
0 to 500 Hz
[5]
Phase Response(100 Hz)
<15 °
<15 °
Broadband Resolution(0.5 to 100 Hz)
.2 mg rms
.002 m/s² rms
[2]
Non-Linearity
≤
1 %
≤
1 %
[6]
Transverse Sensitivity
≤
5 %
≤
5 %
Environmental
Overload Limit(Shock)
± 5000 g pk
± 49,050 m/s² pk
Temperature Range(Operating)
-65 to +250 °F
-54.0 to +121 °C
Temperature Range
(Storage)
-65 to +250 °F
-54.0 to +121 °C
Temperature Coefficient of Sensitivity
± 3 %
± 3 %
[3]
Zero g Offset Temperature Coefficient
± 2 % FSO
± 2 % FSO
[3][4]
Base Strain Sensitivity(Measured at 250 µ
ε
)
.0004 g/µ
ε
.004 (m/s²)/µ
ε
[2]
Magnetic Sensitivity
100 µg/gauss
9.8 (m/s²)/Tesla
[2]
Electrical
Excitation Voltage
6 to 30 VDC
6 to 30 VDC
Current Consumption
≤
10 mA
≤
10 mA
Output Impedance
≤
120 Ohm
≤
120 Ohm
Offset Voltage(0 g)
± 80 mVDC
± 80 mVDC
[1]
Spectral Noise(1 to 100 Hz)
45 µg/
√
Hz
441 (µm/sec
2
)/
√
Hz
[2]
Electrical Isolation(Case)
>10
8
Ohm
>10
8
Ohm
Physical
Housing Material
Titanium
Titanium
Sealing
Hermetic
Hermetic
Size (Height x Length x Width)
0.45 in x 0.85 in x 0.85 in
11.4 mm x 21.6 mm x 21.6 mm
Weight
0.58 oz
16.3 gm
Electrical Connector
4-Pin
4-Pin
Electrical Connection Position
Side
Side
Mounting
Through Holes (2)
Through Holes (2)
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
NOTES:
[1] Offset tolerance is based on 10 ft of 010 test cable.
[2] Typical.
[3] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[4] FSO = Full Scale Output over the Measurement Range (4VDC).
[5] Minimum, verified with Calibration data.
[6] Least-squares, straight line method, % FSO.
[7] See PCB Declaration of Conformance PS027 for details.
SUPPLIED ACCESSORIES:
Model 080A152 Easy Mount Clip (1)
Model 081A113 Mounting screw assembly (2)
Model ACS-145 Phase and Amplitude Calibration from 2 Hz to ±3 dB of frequency range (1)
Model M081A113 Mounting screw assembly (2)
Entered: LK
Engineer: JJD
Sales: WDC
Approved: NJF
Spec Number:
Date: 12/29/2016 Date: 12/29/2016 Date: 12/29/2016 Date: 12/29/2016
60025
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]
