Model Number
201B01
ICP® FORCE SENSOR
Revision: D
ECN #: 48681
[5]
Performance
ENGLISH
SI
Sensitivity(± 15 %)
500 mV/lb
112,405 mV/kN
Measurement Range(Compression)
10 lb
0.0445 kN
Maximum Static Force(Compression)
60 lb
0.267 kN
Broadband Resolution(1 to 10,000 Hz)
0.0002 lb-rms
0.0008896 N-rms
[1]
Low Frequency Response(-5 %)
0.01 Hz
0.01 Hz
[2]
Upper Frequency Limit
90 kHz
90 kHz
[3]
Non-Linearity
≤
1 % FS
≤
1 % FS
[4]
Environmental
Temperature Range
-65 to +250 °F
-54 to +121 °C
Temperature Coefficient of Sensitivity
≤
0.03 %/°F
≤
0.054 %/°C
Electrical
Discharge Time Constant(at room temp)
≥
50 sec
≥
50 sec
Excitation Voltage
20 to 30 VDC
20 to 30 VDC
Constant Current Excitation
2 to 20 mA
2 to 20 mA
Output Impedance
≤
100 Ohm
≤
100 Ohm
Output Bias Voltage
8 to 14 VDC
8 to 14 VDC
Output Polarity(Compression)
Positive
Positive
Physical
Preload
60 lb
0.267 kN
Stiffness
12 lb/µin
2.1 kN/µm
[1]
Size (Diameter x Height x Bolt Diameter x Sensing Surface)
0.650 in x 0.310 in x
0.25 in x 0.50 in
16.5 mm x 7.9 mm x 6
mm x 12.7 mm
Size (ID)(Hole Diameter)
0.251 in
6.38 mm
Size (OD)(Sensor)
0.650 in
16.51 mm
Weight
0.35 oz
10 gm
Housing Material
Stainless Steel
Stainless Steel
Sealing
Hermetic
Hermetic
Electrical Connector
10-32 Coaxial Jack
10-32 Coaxial Jack
Electrical Connection Position
Side
Side
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
N
- Negative Output Polarity
Output Polarity(Compression)
Negative
Negative
W
- Water Resistant Cable
Electrical Connector
Sealed Cable
Sealed Cable
Electrical Connection Position
Side
Side
NOTES:
[1] Typical.
[2] Calculated from discharge time constant.
[3] Estimated using rigid body dynamics calculations.
[4] Zero-based, least-squares, straight line method.
[5] See PCB Declaration of Conformance PS023 for details.
SUPPLIED ACCESSORIES:
Model 080A82 Assembly Lubricant (1)
Model 081A11 Mounting Stud, 10-32 x 0.730, BeCu (1)
Model 082B01 Anti-Friction Washer (1)
Model 083B01 Pilot Bushing (1)
Model M081A11 Mounting Stud, M5 x 0.8 x 0.730, BeCu (1)
Model M083B01 Pilot Bushing (1)
Entered: LK
Engineer: RPF
Sales: KK
Approved: RPF
Spec Number:
Date: 9/19/2018
Date: 9/19/2018
Date: 9/19/2018
Date: 9/19/2018
201-2010-80
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]
