PCB Piezotronics 134A22, Installation And Operating Manual

Page: 23 / 35

Model Number
134A 22
PRESSURE SENSOR, ICP®
Revision: H
ECN #: 52882
P erfo rm an ce EN G L ISH SI
Measurement Range(for ±5V output) 5 kpsi 34,475 kPa
Useful Overrange(for ± 10V output) 10 kpsi 68,950 kPa [1]
Sensitivity(± 15 %) 1 mV/psi 0.145 mV/kPa [2]
Maximum Pressure 15 kpsi 103,425 kPa
Resolution 100 mpsi 0.7 kPa
Resonant Frequency ≥ 1,500 kHz ≥ 1,500 kHz
Rise Time(Reflected) ≤ 0.2 µ sec ≤ 0.2 µ sec
Low Frequency Response(- 5 %) 1.7 Hz 1.7 Hz
Non-Linearity ≤ 2 % FS ≤ 2 % FS [3]
En viro n m en tal
Temperature Range(Operating) -32 to +120 °F -36 to +49 °C
Maximum Flash Temperature ≤ 5,000 °F ≤ 2,760 °C
Electrical
Output Polarity(Positive Pressure) Positive Positive
Discharge Time Constant(at room temp) ≥ 0.3 sec ≥ 0.3 sec
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤ 100 Ohm ≤ 100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
P h ysical
Sensing Element Tourmaline Tourmaline
Housing Material Stainless Steel Stainless Steel
Diaphragm Epoxy Epoxy
Sealing Epoxy Epoxy
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Weight 1.4 oz 39 gm
[4]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Piezotronics, Inc.
M - Metric Mount
N
- Negative Output Polarity
OP TION A L VERSION S
Optional versions have identical specifications and accessories as listed for the standard model except
where noted below. More than one option may be used.
N OTES:
[1]For +10 volt output, minimum 24 VDC supply voltage required. Negative 10 volt output may be
limited by output bias.
[2]Calibrated as a system using (3 inch) type 003 cable and 402A series in-line amplifier.
[3]Zero-based, least-squares, straight line method.
[4]See PCB Declaration of Conformance PS023 for details.
Date: 06/03/2022 Date: 06/03/2022 Date: 06/03/2022 Date: 06/03/2022 6614
Entered: ND Engineer: RPF Sales: MV Approved: BAM Spec Number:
Phone: 7 1 6 -6 8 4 -0 0 0 1
Fax : 7 1 6 -6 8 4 -0 9 8 7
E-M ail: info@ pcb.com
3425 Walden Avenue, Depew, NY 14043
SU P P L IED A C C ESSORIES:
Model 061A30 Spanner Wrench, 2 Pin (1)