Model Number
130B40
ICP® ELECTRET SURFACE MICROPHONE
Revision: D
ECN #: 43176
Performance
ENGLISH
SI
Frequency Response Characteristic
Pressure
Pressure
Frequency Re/-1 dB)
100 to 3000 Hz
100 to 3000 Hz
Frequency Response
(+/-3 dB)
20 to 10,000 Hz
20 to 10,000 Hz
Frequency Response
(+/-6 dB)
20 to 20,000 Hz
20 to 20,000 Hz
Sensitivity(@ 250 Hz)
8.5 mV/Pa
8.5 mV/Pa
Sensitivity
(+/-3 dB)(@ 250 Hz)
-41.4 dB re 1 V/Pa
-41.4 dB re 1 V/Pa
Inherent Noise
<32 dB(A) re 20 µPa
<32 dB(A) re 20 µPa
Dynamic Range(High)
150 dB re 20 µPa
150 dB re 20 µPa
[3][2]
Dynamic Range
(3% Distortion Limit)
>142 dB re 20 µPa
>142 dB re 20 µPa
TEDS Compliant(Per IEEE 1451.4)
Yes
Yes
Environmental
Temperature Range(Operating)
-40 to +176 °F
-40 to +80 °C
[1]
Influence of Axial Vibration(0.1g (1 m/s²))
4.5 dB re 20 µPa
4.5 dB re 20 µPa
[2]
Electrical
Excitation Voltage
18 to 30 VDC
18 to 30 VDC
Constant Current Excitation
2 to 20 mA
2 to 20 mA
Output Bias Voltage
9 to 14 VDC
9 to 14 VDC
Output Impedance
≤ 50 Ohm
≤ 50 Ohm
Physical
Housing Material
Stainless Steel
Stainless Steel
Electrical Connector(Output)
Integral Cable
Integral Cable
Cable Type
030 Coaxial
030 Coaxial
Cable Length
5 ft
1.5 m
Cable Termination
10-32 Coaxial Plug
10-32 Coaxial Plug
Size (Diameter)(Without fairing)
0.52 in
13.2 mm
Size (Diameter)
(With fairing)
1.62 in
41.0 mm
Size (Height)
0.126 in
3.20 mm
Weight
0.3 oz
7 gm
[2]
Weight
(without cable)
0.03 oz
0.8 gm
[2]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
NOTES:
[1]Sensitivity can change with significant variations in temperature.
[2]Typical.
[3]Max without clipping.
[4]See PCB Declaration of Conformance PS023 for details.
SUPPLIED ACCESSORIES:
Model 070A02 Scope input adaptor (micro 10-32 jack to BNC plug) (1)
Model 100-11180-10 IPA Wipe (2)
Model 54924-01 Double Sided Base Adhesive Pad (5)
Model 54925-01 Single Sided Top Adhesive Pad (5)
Model 55739-01 Silicone Fairing (1)
Model ACS-21 Calibration of Electret Microphone (1)
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]
[4]
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard
model except where noted below. More than one option may be used.
Entered: AP
Engineer: MJN
Sales: MV
Approved: MT
Spec Number:
Date: 7/25/2014
Date: 7/25/2014
Date: 7/25/2014
Date: 7/25/2014
56068
Summary of Contents for 130B40
Page 14: ......
