- 5 -
4.2.
Mounting Procedure
1)
Use the cleansing tissue (provided) to clean the location where the Surface Microphone
will be mounted. (Alternatively, clean the surface with isopropanol or cleaning benzene.)
2)
To attach the Surface Microphone using the double-sided adhesive pad (see Figure 6),
peel off the protective paper on one side of the pad to expose its adhesive surface, apply
firmly to the underside of the microphone, then peel off the protective paper on the other
side of the pad to expose the other adhesive surface, and press it onto the clean surface.
Figure 6: Double-sided adhesive pad
NOTE: If the Surface Microphone will be mounted in a location where no air movement
is expected, the pad can be trimmed beforehand to fit the microphone if desired. If the
Microphone will be mounted in moving air and will thus require use of the Fairing, center
the microphone on the pad to ensure adhesion of the Fairing.
3)
When the Surface Microphone will be mounted in a location where air movement is
expected, attach the Fairing: align the Fairing’s slot with the Microphone’s cable and
press the Fairing down over the microphone and onto the exposed adhesive surface of the
double-sided adhesive pad, smoothing out the Fairing as necessary. See Figure 7.
Figure 7: Fairing installed over Surface Microphone
Summary of Contents for 130B40
Page 14: ......
