39
Chapter 3: BIOS Setup Utility
Features Setup Page
This page sets up some parameters for peripheral devices
connected to the system.
OnBoard FDC
This item enables or disables the onboard floppy disk drive
interface.
OnBoard Serial Port A
These items enable or disable the onboard COM1 serial port, and
to assign a port address.
OnBoard IR Port
This item enables or disables the Infrared port, and assigns a port
address. If you select a specific address, the resources are
assigned to the IR port, and you can use these items below to
determine the operation of the IR port.
OnBoard Parallel Port
This item enables or disables the onboard LPT1 parallel port, and
to assign a port address. The Auto setting will detect and
available address.
AMIBIOS SETUP – FEATURES SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
OnBoard FDC
Enabled
OnBoard Serial Port A
OnBoard IR Port Disabled
OnBoard Parallel Port
Auto
Parallel Port Mode
ECP
Parallel Port IRQ
Auto
Parallel Port DMA
Auto
OnBoard IDE
Both
Audio Device
Auto
Modem Device
Auto
Ethernet Device
Enabled
OnBoard USB Function
USB Function For DOS
ThumbDrive Support For DOS
3F8/COM1
Disabled
Enabled
Disabled
N/A
EPP Version
ESC:Quit :Select Item
F1 :Help PU/PD/+/- : Modify
F5 :Old Values (Shift)F2 : Color
F6 :Load Optimal Values
F7 :Load Best Performance Values
