22
Motherboard User’s Guide
Integrated Peripherals Page
This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
Features Setup
Help Item
Auto
32MB
64MB
128MB
256MB
512MB
Enabled
Enabled
IDE
Enabled
Enabled
Disabled
3F8/IRQ4
378
ECP
DMA3
IRQ7
Enabled
Enabled
Onboard IDE Controller
SATA Configuration
Onboard SATA Mode
Onboard AUDIO Function
Onboard LAN Function
Onboard LAN Boot ROM
Serial Port1 Address
Parallel Port Address
Parallel Port Mode
ECP Mode DMA Channel
Parallel Port IRQ
USB Functions
Legacy USB Support
Onboard IDE Controller (Enabled)
Use this item to enable or disable the onboard IDE interface.
SATA Configuration (Enabled)
Use this item to show the Serial ATA Configuration options: Disabled, Compatible,
Enhanced.
Onboard SATA Mode (IDE)
Use this item to choose the onboard SATA mode.
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Load Default Settings
Onboard AUDIO Function (Enabled)
Use this item to enable or disable the onboard Audio function.
Onboard LAN Function (Enabled)
Use this item to enable or disable the onboard LAN function.
Onboard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network add-
in card with a remote boot ROM installed.
Serial Port1 Address (3F8/IRQ4)
Use this item to enable or disable the onboard COM1 serial port, and to assign a port
address.
Parallel Port Address (378)
Use this item to enable or disable the onboard Parallel port, and to assign a port address.
Parallel Port Mode (ECP)
Use this item to select the parallel port mode. You can select Normal (Standard Parallel
Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), or BPP (Bi-
Directional Parallel Port).
