8
Motherboard User’s Guide
CPU Installation Procedure
Follow these instructions to install the CPU:
1
Unhook the locking lever of the CPU socket.
Pull the locking lever away from the socket
and raising it to the upright position.
2
Match the pin1 corner marked as the beveled
edge on the CPU with the pin1 corner on the
socket. Insert the CPU into the socket. Do
not use force.
3
Push the locking lever down and hook it un-
der the latch on the edge of socket.
4
Apply thermal grease to the top of the CPU.
5
Install the cooling fan/heatsink unit onto the
CPU, and secure them all onto the socket
base.
6
Plug the CPU fan power cable into the CPU
fan connector (CPU_FAN1) on the
motherboard.
Installing Memory Modules
This motherboard accommodates two 240-pin DIMM sockets (Dual Inline Memory
Module) for unbuffered
DDR3 1333/1066
memory modules (Double Data Rate
SDRAM), and maximum 8 GB installed memory.
Note
: To achieve better airflow rates and heat dissipation, we suggest that
you use a high quality fan with 4800 rpm at least. CPU fan and heatsink
installation procedures may vary with the type of CPU fan/heatsink
supplied. The form and size of fan/heatsink may also vary.
